Medtronic美敦力动力系统手柄M5手柄1899200常见故障有哪些？

Medtronic美敦力动力系统手柄M5手柄1899200常见故障有哪些？手柄无法转动、转动速度过慢、电机发烫、有噪音等,主要为手柄电机进水引起生锈及电机烧坏、老化等按键无法使用,多为进水引起电缆线故障,多为接触不良,造成内阻变大、氧化、外皮、线缆接口故引起主机无法识别手柄主要为手柄电机损坏无法启动,或为主机线路或控制部分损坏；1、不转，电机坏。2、轴承磨损，3、密封老化磨损，4、线缆靠手柄端破损、老化、打结；

Medtronic power system handle M5 handle 1899200 what are the common faults? The handle cannot rotate, the rotation speed is too slow, the motor is hot, there is noise, etc., which are mainly caused by the rust caused by the water inflow of the handle motor, the burning and aging of the motor, and the key can not be used. Most of them are the cable failure caused by the water inflow, and most of them are the poor contact, resulting in the increase of internal resistance, oxidation, skin and cable interface. Therefore, the handle cannot be recognized by the host. The handle motor is damaged and cannot be started, or the host circuit or control part is damaged; 1. No rotation, motor is broken. 2. Bearing wear, 3. Aging and wear of seal, 4. Damage, aging and knotting of cable near handle end;